Precision Measuring for Perfect Fits
In the glazing industry, "close enough" is not good enough. A discrepancy of 1/8th of an inch can mean a piece of tempered glass—which cannot be cut on site—is useless scrap. Whether you are a general contractor with 50 units to order or a homeowner planning a DIY project, accurate measurement is the foundation of success. Installix offers professional site measurement services in Brampton. We take the liability off your shoulders, using laser precision to provide manufacturing-ready dimensions.
The Risk of Measuring Yourself
Rough Opening vs. Unit Size
Novices often measure the "daylight opening" (what you see) or the "rough opening" (the stud framing). Neither is the correct glass size. You must calculate the "bite" (how far the glass sits inside the frame) and deduct for setting blocks and expansion gaps. We know these formulas for every window system.
Out-of-Square Openings
Older Brampton homes have settled. Frames are rarely perfectly square. Measuring just width and height isn't enough; you need to check diagonals and use laser levels to determine the "tightest point" of the opening so the glass doesn't bind.
The Solution: Guaranteed Dimensions
When we measure, we produce a detailed cut-sheet ready for the factory. If we measure it and we install it, we guarantee the fit. If it's wrong, we pay for the remake.
Why Choose Installix?
- Laser Technology: We use Bosch laser measures and digital protractors for complex shapes (arches, rakes).
- Template Service: For non-geometric shapes, we create physical hard-board templates to send to the glass plant.
- Hardware Prep: We measure hinge locations and handle bore heights for glass doors to the millimeter.
Technical Process
| Metric | Detail |
|---|---|
| Deductions | We calculate standard deductions (e.g., -1/4" width, -1/4" height) based on the glazing channel depth. |
| Thickness Check | We use glass thickness gauges to determine if existing units are 3mm, 4mm, 5mm, or 6mm. |
| Coatings | We use detectors to identify which surface has the Low-E coating to ensure the new glass matches. |
Our Process: Measure Twice, Cut Once
Step 1: Site Visit
We visit the site once the framing or existing frames are ready.
Step 2: Drawing
We produce a labeled diagram for every piece of glass, noting tempering stamps and polished edges.
Step 3: Verification
We cross-check measurements against access paths (e.g., will this 100" wide glass fit in the elevator?).
Pricing Factors
- Scope: Measuring one window vs. an entire condo tower.
- Complexity: Templates for curved glass cost more than simple rectangle measurements.
- Credit: Ideally, the measurement fee is credited towards the installation if you proceed with us.
Our Service Promise
Accuracy guaranteed. Don't pay for mistakes.
Plan for perfection.
Contact Installix for a measurement appointment.
Why Brampton Residents Trust Installix
Local Compliance
We meet all building codes specific to Brampton.
Fast Response
Our technicians are frequently in Brampton.
Weather Ready
Glass rated for our freeze/thaw cycles.
FAQ: Custom Measurements in Brampton
Custom Measurements in Other Cities
Other Services in Brampton
Need Glass in Brampton?
Don't wait. Send us a photo of your damaged glass and get a fast quote.
Request QuoteCall 905-516-9071